Matt Scott Matt Scott's Profile Page

Matt Scott Matt Scott

0 Course Enrolled • 0 Course Completed

Biography

Cisco 800-150 Exam | 800-150 Free Vce Dumps - High-effective Company for 800-150: Supporting Cisco Devices for Field Technicians Exam

Our 800-150 exam torrent is compiled by first-rank experts with a good command of professional knowledge, and our experts adept at this exam practice materials area over ten years' long, so they are terrible clever about this thing. They exert great effort to boost the quality and accuracy of our 800-150 study tools and is willing to work hard as well as willing to do their part in this area. Our 800-150 study tools galvanize exam candidates into taking actions efficiently. We are sure you will be splendid and get your desirable outcomes by our 800-150 exam guide. If your mind has made up then our 800-150 study tools will not let you down.

Cisco 800-150 Exam Syllabus Topics:

Topic
Details

Topic 1

Cisco UCS and Data Center Architecture: This section of the exam measures the skills of a Data Center Engineer and introduces Cisco’s UCS and data center solutions. It explains the devices found in a data center, including switches, UCS servers, and director switches, and describes different server deployment models. Students will also learn about virtualization components like virtual machines, hypervisors, cloud computing concepts, and deployment models. The section covers how Cisco UCS devices fit into campus networks, edge locations, and data centers, and explains the key components and connections used in UCS architecture.

Topic 2

Common Service Tasks and Tools: This section of the exam measures the skills of a Technical Support Engineer and focuses on tasks commonly needed to manage Cisco devices. It explains how devices boot up, introduces common Cisco IOS commands, and identifies tools for file management. It shows how to confirm physical connections, remotely access devices, and connect to the console port. It also covers how to capture the status of a device, recover passwords, and replace devices by using proper tools. Students are also taught how to find serial numbers on Cisco equipment to assist with support and maintenance activities.

Topic 3

Cisco Infrastructure and Collaboration Infrastructure: This section of the exam measures the skills of a Collaboration Engineer and focuses on Cisco infrastructure devices, endpoints, and collaboration technologies. It introduces network devices, collaboration endpoints like IP phones and video systems, and explains on-premises collaboration deployments using tools like Cisco Unified Communications Manager. It also covers how video systems integrate into collaboration environments and highlights Cisco’s cloud services for enterprise communication, including Webex Meetings, Webex Teams, and hosted collaboration solutions.

Topic 4

Cisco Hardware Replacement: This section of the exam measures the skills of a Technical Support Engineer and teaches how to safely and correctly replace Cisco hardware. It explains safety procedures such as creating safe work zones and handling electrostatic discharge. Students learn the step-by-step processes to replace a wide range of Cisco devices, from switches and routers to firewalls, UCS servers, and collaboration endpoints. It also covers configuring Cisco NX-OS software, including understanding operating modes, boot procedures, and password recovery, and introduces Cisco collaboration endpoint solutions like IP phones and video systems.

>> 800-150 Free Vce Dumps <<

800-150 Certification Exam & Download 800-150 Demo

In order to help you enjoy the best learning experience, our PDF 800-150 practice engine supports you download on your computers and print on papers. You must be inspired by your interests and motivation. Once you print all the contents of our 800-150 practice dumps on the paper, you will find what you need to study is not as difficult as you imagined before. Also, you can make notes on your papers to help you memorize and understand the difficult parts of the 800-150 Exam Questions.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q26-Q31):

NEW QUESTION # 26
What is the purpose of the packages.conf file in Install mode on Cisco IOS XE Software supported switches?

A. It is a subdirectory in flash memory where individual software packages are stored.
B. It contains the entire bundled software image in a single file.
C. It determines which software packages need to be loaded and in what order during boot up.
D. It is used to extract the bin file during the installation process.

Answer: C

Explanation:
InInstall mode, thepackages.conffile plays a crucial role in the boot process of Cisco IOS XE Software. It specifies the list of software packages to be loaded and the sequence in which they should be initialized during system startup. This file ensures that all necessary components are correctly loaded, providing a modular and flexible approach to software management.
Contrary to the other options:
* Thepackages.conffile does not extract the bin file; it references already extracted packages.
* It does not contain the entire bundled image; that's characteristic of Bundle mode.
* While it resides in the flash memory, it is not a subdirectory but a configuration file.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics

NEW QUESTION # 27
Which step must be performed immediately after powering off the device when replacing a Cisco chassis?

A. Remove the chassis.
B. Remove the chassis ground.
C. Back up the device configuration.
D. Label and remove all I/O cables.

Answer: D

Explanation:
After powering off a Cisco device in preparation for chassis replacement, theimmediate next stepis tolabel and remove all I/O cables. This step is crucial to ensure that all connections can be accurately restored after the new chassis is installed.
Proper labeling prevents confusion and potential misconfigurations during reassembly. Only after all cables are safely disconnected should you proceed to remove the chassis ground and then the chassis itself.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

NEW QUESTION # 28
How must the power to a system with dual power supplies on aCisco Nexus switch be connected?

A. Connect each power supply to a separate power source.
B. Connect both power supplies to a power distribution unit with built-in redundancy.
C. Connect the primary power supply to the main source and the secondary to a backup generator.
D. Connect both power supplies to a single power source.

Answer: A

Explanation:
In a Cisco Nexus switch withdual power supplies, the recommended method is toconnect each power supply to a separate power source(Option C). This ensures power redundancy and fault tolerance.
If one power source fails (e.g., due to a power outage or circuit failure), the switch can continue operating uninterrupted using the second power source. Connecting both to a single source (Option D) defeats the purpose of redundancy.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

NEW QUESTION # 29
Which common CLI command isused to install Cisco NX-OS Software?

A. install all
B. copy tftp: running-config
C. boot system
D. install kickstart

Answer: A

Explanation:
Theinstall allcommand is the standard method used to install or upgrade Cisco NX-OS software on Nexus switches. This command streamlines the installation process by automating tasks such as verifying the software image, checking for compatibility, and managing the installation of optional packages or SMUs (Software Maintenance Upgrades). It ensures a comprehensive and efficient upgrade process, minimizing the potential for errors.Cisco In contrast:
* copy tftp: running-configis used to copy configuration files, not software images.
* install kickstartis an outdated command from earlier NX-OS versions.
* boot systemsets the boot variable but does not handle the full installation process.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics

NEW QUESTION # 30
What must be considered when installing a new fan module in a fixed-configuration Cisco Nexus switch?

A. The size of the fan module must match the power supply.
B. Fan modules can be installed only when the switch is powered off
C. The airflow direction must be consistent with other installed modules.
D. The fan module must be from the same manufacturing batch as the others.

Answer: C

Explanation:
When installing a fan module in a Cisco Nexus fixed-configuration switch, it's crucial to ensure that the airflowdirection of the new fan matches the existing airflow configuration. Mismatched airflow directions can lead to inefficient cooling or even overheating of components, potentially affecting the performance or lifespan of the switch.
Cisco offers fan modules infront-to-backorback-to-frontairflow variants, and consistency is required for proper thermal management. These modules are also typically hot-swappable, meaning powering down the switch is not necessary.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

NEW QUESTION # 31
......

Although the Cisco 800-150 exam prep is of great importance, you do not need to be over concerned about it. With scientific review and arrangement from professional experts as your backup, and the most accurate and high quality content of our Cisco 800-150 Study Materials, you will cope with it like a piece of cake. So Cisco 800-150 learning questions will be your indispensable practice materials during your way to success.

800-150 Certification Exam: https://www.real4exams.com/800-150_braindumps.html

Matt Scott Matt Scott

Biography

Quick Links

Resource